Our Blog

The words “overbite” and “overjet” certainly sound similar. Both conditions concern your front teeth. Both conditions fall under the same category of bite problems—Class II malocclusions, if you want to be technical. So it’s not surprising that they’re often used interchangeably. But while there are similarities, overbite and overjet are also distinctly different.

• Overbite/Overjet Geometry

In a healthy bite, the front top teeth project slightly beyond, and slightly overlap, the bottom teeth. The key word here is “slightly.” With a Class II malocclusion, the upper front teeth project further beyond the lower teeth than they should.

Of course, teeth and bites are as individual as we are, so there are variations in just how and just how much the overlap occurs. In diagnosing an overbite vs. an overjet, the difference comes down to a matter of vertical vs. horizontal.

An overbite, or deep bite, occurs when the top teeth vertically overlap the bottom teeth more than they should for a healthy bite. Generally, when a person’s top teeth cover more than a quarter of the bottom teeth when biting down, or more than two to three millimeters, that person is said to have an overbite.

An overjet, commonly known as protruding or buck teeth, is the result of a horizontal overlap that is broader than normal. This causes the top teeth to project outward toward the lips more than they do in a typical bite. An overjet is usually diagnosed when the horizontal distance between the top and bottom teeth exceeds two to three millimeters.

• Overbite/Overjet Causes

The causes for both an overbite and an overjet might be dental (caused by tooth alignment), or skeletal (caused by bone development), or a combination of both. These bite problems can run in families. They are also affected by the size and position of the jaws and the shape and position of the teeth.

Early oral habits, such as prolonged and vigorous thumb-sucking or pacifier use, can also contribute to the development of a Class II malocclusion, particularly an overjet. Consistent pressure from thump or pacifier pushes the teeth outward as they erupt, which encourages them to protrude. These oral habits can affect the shape of the palate and jaw, too.

• Overbite/Overjet Treatments

There are many types of treatment available to correct teeth and bite misalignments. Dr. Daniel Very will tailor your treatment to your specific malocclusion for the best orthodontic outcome.

If you have a mild malocclusion, and minor dental issues are the main cause of that malocclusion, either braces or clear aligners can be effective for an overjet or an overbite. Elastics (rubber bands) are often used as part of this treatment.

If the malocclusion is due to bite problems caused by uneven upper and lower jaw development, devices called functional appliances can be used with braces to help guide the growth of the jawbones while young patients’ bones are still forming. These include appliances that work inside the mouth to help the upper and lower jaws grow proportionally, and external appliances such as headgear.

In some cases, where the malocclusion is skeletal in nature as well as dental, surgical treatment might be necessary to reshape the jawbone itself. Orthodontic treatment is usually needed as well both before and after surgery.

• Overbite/Overjet Consequences

Over time, a deep overbite can cause damaged gum tissue, worn enamel, and fractured teeth. When teeth protrude because of an overjet, they can lead to self-consciousness and are more at risk for injury. Both malocclusions share dental and medical consequences, including concerns about facial and jaw appearance, problems speaking or chewing, headaches, and face and jaw pain.

Class II malocclusions aren’t all the same, and orthodontic patients aren’t all the same either. You may have a minor malocclusion or a significant one. You may have an overbite, or an overjet, or a combination of different bite and alignment concerns. Your malocclusion may not bother you at all, or it may cause pain, discomfort, or self-consciousness.

That’s why every overbite or overjet should be evaluated by an orthodontist. When you visit our Boardman or Niles orthodontic office, Dr. Daniel Very will be able to diagnose the exact nature of your malocclusion, the reason for it, and your best individualized treatment plan. An overbite and an overjet are different malocclusions, but you and your orthodontist want the same outcome for each: a healthy, attractive, and confident smile!

When you get your braces, Dr. Daniel Very and our staff will also give you a list of foods you should not eat and things you should not do. Pay particular attention to these items to keep your teeth and braces safe.

Charms belong on bracelets. While you can decorate your braces with colored bands, hanging a charm off them is a bad idea. If you bite down on the charm, you could damage your braces or your teeth. You could also swallow your jewelry.

Never use your teeth as a bottle opener. This is just as important when you are wearing braces. While braces straighten your teeth, your teeth are moving in the process. That makes them weaker, and the metal in the braces does not make them invincible. Invest in a bottle opener; you can buy one for a few dollars, which is much less expensive than having to replace your braces.

Contrary to what you might think, your braces are not designed to work as a radio. There are tales of people who have picked up radio signals from dental fillings or braces. While this is remotely possible, attaching an antenna to your mouth is just not a good idea. You will get better quality music from a radio.

On the other hand, you can still kiss someone while wearing braces. In fact, even if both of you wear braces, the chances of your getting locked together are almost negligible. However, to avoid cutting your partner’s lips, kiss with caution.

If you have any questions about taking care of your braces, please ask Dr. Daniel Very and our staff. We want you to get the best results from your treatment without needless delays.

Kids can be picky eaters. How many times have you seen your child try to hide the peas under a mound of mashed potatoes?

At Very Orthodontics, Dr. Daniel Very and our team understand how hard it can be to get your child to eat the recommended daily allowance of fruits and vegetables. The task of providing fun, nutritious meals becomes even more challenging if he or she wears braces. It's an age-old saying that breakfast is the most important meal of the day. These five braces-friendly recipes are not only nutritious, but they will have little Jimmy flashing his “tin grin” when he sits down at the kitchen table in the morning.

1. Scrambled eggs are soft and easy to eat if you have braces. If you drown them in ketchup (which many kids love to do), eggs become even mushier. Minimal chewing is required, and that’s the key to a braces-friendly recipe.
2. A healthy breakfast provides energy and jump-starts metabolism. A smoothie is not only a good source of fruit, but it’s also gentle on braces. More importantly, smoothies are fun to create. You can toss anything in the blender (bananas, mangoes, strawberries, spinach) and create a drink that’s loaded with vitamins and antioxidants.
3. If you wear braces, eating crunchy cereals or granola for breakfast is out of the question: Bite down the wrong way and you might snap the wires or dislodge the brackets. However, you can get your grains and oats by substituting oatmeal for cereal. This mushy breakfast treat has a host of health benefits.
4. Pancakes are not the healthiest breakfast choice. Still, this Sunday morning favorite is braces-friendly. The idea is to make it healthier by hiding blueberries in the pancake batter just like your child hides peas in the mashed potatoes.
5. Toast with jam is ok, but skip slathering peanut butter on the bread. If you have braces, the general rule of thumb is to steer clear of foods that are hard or chewy. These types of foods can break wires. Of course, most kids will agree that toast isn’t the most exciting breakfast recipe. Make it a Pop-Tart instead!

For more braces-friendly recipes, please give us a call at our convenient Boardman or Niles office!

Maybe you’ve wanted braces since childhood. Maybe you had them, but your teeth have shifted over time. Maybe you’re tired of living with an uncomfortable bite. Good news! If you’re not happy with your adult smile, that doesn’t mean you’ve missed the opportunity to have the healthy, attractive smile you’ve always dreamed of.

While there are many benefits to having orthodontic work done as a child, there’s a lot to be said for orthodontic treatment as an adult. After all, you know exactly what you want. You’re dedicated to following your treatment plan. You have plenty of discreet orthodontic options available now, from clear aligners to lingual braces, to make your treatment as inconspicuous as possible.

But, on occasion, adult treatment does come with some adult baggage. Worried about your crowns, fillings, or veneers? If these restorations are part of your dental history, we can generally work with them. Dental implants? Those might fall into a slightly different category.

Implants are a great way to restore your smile because they function like your natural teeth. They are designed to look just like natural teeth, and they allow you to speak, chew, and bite with confidence. Implants even stimulate the jawbone when we chew just as natural teeth do, helping to prevent bone loss in the jaw as we age.

But there is one important difference between implants and natural teeth: implants are firmly anchored in the jaw, while your natural teeth can change position.

Why is this a concern? Because tooth movement is one of the basics of orthodontic treatment. Unlike implants, our teeth aren’t firmly anchored in our jaws. They are held in their sockets by a ligament which cushions them and connects the tooth to the bone.

When braces or aligners gently apply consistent pressure to the teeth, the ligaments and eventually the bones holding the teeth reshape themselves in response to this pressure, and then become stable again during the retainer phase of treatment.

Implants, on the other hand, are crowns attached to a metal cylinder or screw that is surgically implanted into the jawbone. After several months, osseointegration takes place—which is a technical way of saying that the metal base fuses with the bone. This means that there won’t be any movement taking place—good when you’re chewing, but not helpful for realignment!

If you haven’t yet replaced a missing tooth with an implant, it’s often best to wait before starting orthodontic work. We can design treatment around a missing tooth, leaving room to accommodate an implant in just the right spot when your orthodontic treatment is finished.

If you have an implant already, the placement of your implant will help determine your treatment:

• If your implant is already perfectly placed for your future alignment, braces or aligners can be designed to work with and around your implant.
• If the placement is almost ideal, you might find a very small degree of misalignment acceptable, and we can plan your treatment around your existing implant.
• If it’s not possible to work with your implant where it’s presently located, it is possible to remove an implant. You would then have the implant procedure redone after your orthodontic work is complete.

Talk to Dr. Daniel Very about your treatment possibilities. By analyzing your orthodontic goals and working with your dental history, we can let you know exactly what can be done for your teeth and bite—even if you have an implant.

True, there are many benefits to having orthodontic work done in your childhood, but there’s a lot to be said for orthodontic treatment as an adult. And the greatest benefit of all? You’ll finally have the healthy, self-confident smile you’ve always dreamed of. Talk to our Boardman or Niles team about making that smile a reality.